JooMix - Joomla templates CMS Joomla Help

    

TEG Sistemi, yetişkinlerin kan hemostaz özelliklerinin değerlendirilmesi istenildiğinde kullanılmak için gereklidir.

Teknik Bilgiler

TEG ® 5000 Thrombelastograph ® Hemostaz Analyzer sistemi kanama ve tromboz riski değerlendirmenize yardımcı olabilir ve aynı zamanda antitrombotik tedaviler izleyebileceğiz kapsamlı kan hemostaz testleri sağlayan birtanı aracıdır. Hastalar üzerinde hemostaz daha kapsamlı bir resim sunarak, TEG sistemi daha hedefli tedavlersunabilmeleri için hemorajik veya trombotik risk tanımlarını kolaylaştırarak yardımcı olabilir. PlateletMapping ® Testikullanımı yoluyla, cihazın kendi genel hemostaz için antiplatelet tedavi göreceli olarak hastaların olası cevabı bir grafik çıktısı olarak ("izleme")  sağlamaya yardımcı olabilir. Grafik testleri, ve sayısal veri çıkışı, uzaktan veri izleme ve daha çeşitli bağımsız iki örnek kanalları, TEG sistem hemostaz yönetiminde tedavisinde yeni standart haline gelmiştir.

Technical Information

Our TEG® 5000 Thrombelastograph® Hemostasis Analyzer system is a diagnostic instrument that provides comprehensive whole blood hemostasis testing that can help assess bleeding and thrombotic risks, and also monitor antithrombotic therapies. By providing a more complete picture of your patients' hemostasis, the TEG system can help facilitate your understanding of hemorrhagic or thrombotic risk so you can deliver more targeted treatment. And through the use of the PlateletMapping® Assay, the device can help provide a picture ("tracing") of your patients’ potential response to antiplatelet therapy relative to their overall hemostasis. With two independent sample channels of a variety of tests, graphical and numerical data output, remote data viewing, and more, the TEG system has become the new standard of care in hemostasis management.

Device Specifications Value
Two (2) independent measuring channels per analyzer, up to eight (8) channels per computer  
Cables included  
Cup drive Line-synchronized, with synchronous motor
Temperature control Individual temperature control per each channel
Measuring technique Shear elasticity of a coagulating sample
Transducer Electrical-mechanical transducer of movement of torsion wire connected to the suspended pin
Sample volume 360 µL
Power External power supply, CSA listed
  120 V model @ 60 Hz or 220 V model @ 50 Hz
Operating position Setting verified with spirit level
Dimensions (H x W x D) 11.4 in x 8.6 in x 7.0 in
  29 cm x 22 cm x18 cm
Weight 12 lbs (5.4 kg)
   
Computer hardware/software requirements Computer required for TEG system operation to be obtained from your IT or purchasing departments or through an external source. To be configured as follows:
Supported configurations  
   
A. TEG enabled version (e.g., laboratory) Monitor resolution: 1024 x 768 or greater
  1.6 GHz Pentium 4 processor or higher
  1 GB RAM or higer
  10 GB hard drive
  Available COM port (RS232 9-pin serial port)
  SVGA video adapter running 24-bit color settings within a Windows® operating system
  CD-ROM drive for installation; recommend CD-RW for backup and data transfer
  Network adapter, if network access required
  Windows 2000 Professional - SP4 or higher
  Windows-compatible printer, if hard copy is required
  Uninterruptible power supply (UPS)
  Optional: Touch screen interface (requires either additional COM port or USB port)
  Bar code scanner for patient ID and operator ID information (requires additional COM port)
  TCP/IP connection required if LIS interface is anticipated
   
B. TEG remote version (e.g., OR, ICU/CCU, ER, etc.) To install and use TEG Analytical Software on a TEG remote version, all of the above is needed except for having an available COM port and UPS
 
ÇAĞRI MERKEZI

+90 216 594 55 96
 
MAİL İLE ULAŞIN

info@hctbiomedikal.com.tr
NEREDEYIZ

Ümraniye / İstanbul